Coilover springs, Diff additive, Eccentric Subframe bolts

Sell stuff
Post Reply
User avatar
85_Z31
Datsun Master
Posts: 1494
Joined: Sun Jul 18, 2010 10:53 pm
Location: Rangiora North Canterbury

Coilover springs, Diff additive, Eccentric Subframe bolts

Post by 85_Z31 »

Hi Guys

Found a whole heap more stuff i want to get out of my way in the garage so here it

More Coil over Springs $40 per set of 2 both pair are 180mm tall. I don't have the exact spring rates but I'm pretty sure both sets are 6kg mm
Image

Image

Red line LSD additive - Brand new un opened bottle. I ordered it before i drove my car and I don't need it because i do not get any clutch chatter.
Cost me $40

Image

Eccentric Camber / Toe Bolts

Image

These came of My Parts car & some suspension arms i bought a while back, these are factory Nissan Toe Adjustment bolts. They could be used to make an adjustable subframe and are the same length as 610 or 510 suspension arm bolts.

NOTE these would suit a setup only needing small to medium amounts of adjustment - but in saying these would be really easy to fit to a sub frame, all you need is a thin strip of metal each side for the eccentric cam to slide on.

I'm going to say $80 for the full set of x4 adjustment bolts. these are 14mm diameter not the usual 13.5mm so your inner sleeves will need to be drilled or reamed out.


Z31 Turbo bonnet scoop

Image

Image

Image

I a few of these and this one needs to go , no cracks or dents, has old nasty paint on it but all 4 mounting studs are good. I would say its average condition but would come up mint with some preparation work. $60 because its so 80's badass.
The Answer to your Question is NEEDS MORE VG30
User avatar
sr1600
Financial Member
Posts: 383
Joined: Mon Aug 04, 2008 8:35 am
aka: Mark
Location: Whakatane

Re: Coilover springs, Diff additive, Eccentric Subframe bolt

Post by sr1600 »

What the ID on the springs? looking for some with a 60-65mm id
User avatar
85_Z31
Datsun Master
Posts: 1494
Joined: Sun Jul 18, 2010 10:53 pm
Location: Rangiora North Canterbury

Re: Coilover springs, Diff additive, Eccentric Subframe bolt

Post by 85_Z31 »

they are Japanese Size so 63mm inside, so a shade smaller than 2.5"
The Answer to your Question is NEEDS MORE VG30
User avatar
85_Z31
Datsun Master
Posts: 1494
Joined: Sun Jul 18, 2010 10:53 pm
Location: Rangiora North Canterbury

Re: Coilover springs, Diff additive, Eccentric Subframe bolt

Post by 85_Z31 »

Black Springs Sold
The Answer to your Question is NEEDS MORE VG30
Post Reply