FITTING 15' MAGS TO 1600

[torqued]

Na don't do flares.
Keep the original lines.

Ill get some measurements off mine tonight.

Are these rough measurements correct? Frm website
15x8 +20 rims
Backspace should be 134mm
Outer Lip 52mm

15x7 0
Backspace should be 101mm
Out lip 59 mm

From this you should be able to work out what you need.

Looking at those rims in the first photo. Whats the strut clearance, They look pretty close to me

[cul8r]

That first wheel you pictured is the DTM Oldschool 15x8 20p. You can do a basically identical wheel through a seperate supplier, called the Takashi 15x7 20p. These will fit fine, you should be paying around $215-225 per rim for the Takashi..

Dish on the rear, and small lip on the fronts..

[mint16]

Are you still running 4pot brakes?

[hsepwr]

Are you still running 4pot brakes?

Yeh still running them they are too good to get rid off

[chris_g1]

If you put "takashi" in the search box on trademe there are 3 sets, two used,$570 and $500 plus a new set for $227 per wheel.
All 15" x 7".

[mint16]

So you gotta space the 15inch wheels to clear the calipers?
Isnt it the case of either low offset wheels or 4pots?
Cant do both, I had to make the choice.

[SRDATO]

I have a 20p ones in ya first pic's on mine - Camber front and 20mm spacers rear and stretched 195s - rears rubbed suspension arms without spacers and sat in to far but if i went 0p the were perfect but stuck miles out on the front, mines got the r31 datsport coilover fronts http://www.datsport.com/R32Z_CO_DS.html" onclick="window.open(this.href);return false;

[torqued]

Craig, How did you get on with this?


Also: on a side ntoe did we ever work out what the difference between 280z and 910 struts were?

[hsepwr]

Craig, How did you get on with this?


Also: on a side ntoe did we ever work out what the difference between 280z and 910 struts were?

Hey man ive had quite a few different offset and sized mags on the car over the last few weeks and ive come to the conclusion that im going to make a set of coilover for the front out of some spare R30 struts as it seems that everyone who has top camber plates are tucking the wheel in enough to get them inside the guard then i will pick a wheel to suit. I am getting a set of 280Z struts this week to do some comparisons on against the 910 and the R30 so ill be able to let you know

[torqued]

Aweseom. Be interesting to see