Na don't do flares.
Keep the original lines.
Ill get some measurements off mine tonight.
Are these rough measurements correct? Frm website
15x8 +20 rims
Backspace should be 134mm
Outer Lip 52mm
15x7 0
Backspace should be 101mm
Out lip 59 mm
From this you should be able to work out what you need.
Looking at those rims in the first photo. Whats the strut clearance, They look pretty close to me
FITTING 15' MAGS TO 1600
Re: FITTING 15' MAGS TO 1600
"It's ok, we know what to do...we talked about this a lot on the internet."
Re: FITTING 15' MAGS TO 1600
That first wheel you pictured is the DTM Oldschool 15x8 20p. You can do a basically identical wheel through a seperate supplier, called the Takashi 15x7 20p. These will fit fine, you should be paying around $215-225 per rim for the Takashi..
Dish on the rear, and small lip on the fronts..
Dish on the rear, and small lip on the fronts..
- mint16
- Financial Member
- Posts: 1854
- Joined: Sat Jul 19, 2008 8:36 am
- aka: Brendan
- Location: Christchurch
Re: FITTING 15' MAGS TO 1600
Are you still running 4pot brakes?
72 Datsun 1200 Wagon
86 Toyota AE85 Trueno 4AGE ITB
86 Toyota AE85 Trueno 4AGE ITB
- hsepwr
- Datsun Nutter
- Posts: 428
- Joined: Mon Sep 22, 2008 9:18 pm
- aka: Craig
- Location: Hastings
- Contact:
Re: FITTING 15' MAGS TO 1600
Yeh still running them they are too good to get rid offmint16 wrote:Are you still running 4pot brakes?
I REAKON THE WORD CANT MEANS CANT BE FU%&#CKED
Re: FITTING 15' MAGS TO 1600
If you put "takashi" in the search box on trademe there are 3 sets, two used,$570 and $500 plus a new set for $227 per wheel.
All 15" x 7".
All 15" x 7".
- mint16
- Financial Member
- Posts: 1854
- Joined: Sat Jul 19, 2008 8:36 am
- aka: Brendan
- Location: Christchurch
Re: FITTING 15' MAGS TO 1600
So you gotta space the 15inch wheels to clear the calipers?
Isnt it the case of either low offset wheels or 4pots?
Cant do both, I had to make the choice.
Isnt it the case of either low offset wheels or 4pots?
Cant do both, I had to make the choice.
72 Datsun 1200 Wagon
86 Toyota AE85 Trueno 4AGE ITB
86 Toyota AE85 Trueno 4AGE ITB
- SRDATO
- Financial Member
- Posts: 172
- Joined: Tue Jul 19, 2011 7:44 pm
- aka: Nic
- Location: Christchurch
- Location: Christchurch
- Contact:
Re: FITTING 15' MAGS TO 1600
I have a 20p ones in ya first pic's on mine - Camber front and 20mm spacers rear and stretched 195s - rears rubbed suspension arms without spacers and sat in to far but if i went 0p the were perfect but stuck miles out on the front, mines got the r31 datsport coilover fronts http://www.datsport.com/R32Z_CO_DS.html" onclick="window.open(this.href);return false;
MADDAT SR20DET 510 - Sold
94 GTR Skyline 580hp money pit
94 GTR Skyline 580hp money pit
Re: FITTING 15' MAGS TO 1600
Craig, How did you get on with this?
Also: on a side ntoe did we ever work out what the difference between 280z and 910 struts were?
Also: on a side ntoe did we ever work out what the difference between 280z and 910 struts were?
"It's ok, we know what to do...we talked about this a lot on the internet."
- hsepwr
- Datsun Nutter
- Posts: 428
- Joined: Mon Sep 22, 2008 9:18 pm
- aka: Craig
- Location: Hastings
- Contact:
Re: FITTING 15' MAGS TO 1600
torqued wrote:Craig, How did you get on with this?
Also: on a side ntoe did we ever work out what the difference between 280z and 910 struts were?
Hey man ive had quite a few different offset and sized mags on the car over the last few weeks and ive come to the conclusion that im going to make a set of coilover for the front out of some spare R30 struts as it seems that everyone who has top camber plates are tucking the wheel in enough to get them inside the guard then i will pick a wheel to suit. I am getting a set of 280Z struts this week to do some comparisons on against the 910 and the R30 so ill be able to let you know
I REAKON THE WORD CANT MEANS CANT BE FU%&#CKED
Re: FITTING 15' MAGS TO 1600
Aweseom. Be interesting to see
"It's ok, we know what to do...we talked about this a lot on the internet."