WTB: coilovers to suit b210, s13 camber plates
-
- Datsun Master
- Posts: 1437
- Joined: Tue Jul 22, 2008 5:56 pm
- aka: Nick m
- Location: Christchurch
Re: WTB: coilovers to suit b210, s13 camber plates
what about getting some custom made by mrp like dan did for his 1600. They were $690, way cheaper than building your own
Re: WTB: coilovers to suit b210, s13 camber plates
oh wow thats mad cheap!
-
- Datsun Master
- Posts: 1437
- Joined: Tue Jul 22, 2008 5:56 pm
- aka: Nick m
- Location: Christchurch
Re: WTB: coilovers to suit b210, s13 camber plates
just pm Dan1200sss he will fill you in on the details. They are real good coil overs too
Re: WTB: coilovers to suit b210, s13 camber plates
Got in touch with Barry at MRP
"We are now using the Fortune Auto coilovers to do these types of conversions.
The coilovers are $875 incl GST. If you cut them then welding is $40.
If you need an xray cert on the welding thats $120."
He must have been getting too many people asking for it haha. I think ill do some research and see if s13 stuff will be short enough, and then get the adaptor boss made to suit.
"We are now using the Fortune Auto coilovers to do these types of conversions.
The coilovers are $875 incl GST. If you cut them then welding is $40.
If you need an xray cert on the welding thats $120."
He must have been getting too many people asking for it haha. I think ill do some research and see if s13 stuff will be short enough, and then get the adaptor boss made to suit.
- Tony_Whenua
- Financial Member
- Posts: 433
- Joined: Fri Jan 13, 2012 6:58 pm
- Location: Blenheim
- Contact:
Re: WTB: coilovers to suit b210, s13 camber plates
I got this quoted from Evan Pittman
Hi.
The shocks from the black struts if are in good condition look to be short enough.
Threaded collars, springs and keep springs and top alloy locator hats. $320 pr
To cut, shorten the struts to utilise you shock inserts from black struts, weld prep and paint $390. There is a bit of time in removing the section to utilise the factory top thread and nut as this is what holds the inserts in place.
We have to carry out a crack test report for LTSA requirements. This is for a load carrying weld which is the for the spring perch. This is $110
Finished coilovers will look pretty like picture attached.
Let me know if you have any questions
Thanks
Hi.
The shocks from the black struts if are in good condition look to be short enough.
Threaded collars, springs and keep springs and top alloy locator hats. $320 pr
To cut, shorten the struts to utilise you shock inserts from black struts, weld prep and paint $390. There is a bit of time in removing the section to utilise the factory top thread and nut as this is what holds the inserts in place.
We have to carry out a crack test report for LTSA requirements. This is for a load carrying weld which is the for the spring perch. This is $110
Finished coilovers will look pretty like picture attached.
Let me know if you have any questions
Thanks
"Dude you're like 30 degrees retarded" - Chris_g1 & 2 Doors
- 85_Z31
- Datsun Master
- Posts: 1494
- Joined: Sun Jul 18, 2010 10:53 pm
- Location: Rangiora North Canterbury
Re: WTB: coilovers to suit b210, s13 camber plates
Just a tip for the crack testing.
Southern QA in Christchurch do the testing and they can complete the correct paperwork for LVVTA requirements, and give you a full copy of the report.
Getting one thing tested costs about $100, and after that each additional item is $5, so it pays to have all your cert related welded tested.
Southern QA in Christchurch do the testing and they can complete the correct paperwork for LVVTA requirements, and give you a full copy of the report.
Getting one thing tested costs about $100, and after that each additional item is $5, so it pays to have all your cert related welded tested.
The Answer to your Question is NEEDS MORE VG30
- Kitch
- Financial Member
- Posts: 1689
- Joined: Wed Aug 20, 2008 9:29 am
- Location: Timaru
- Location: Timaru
- Contact:
Re: WTB: coilovers to suit b210, s13 camber plates
my cert guy said he did not need my struts crack tested, he was happy just to inspect welds, as long as I gave him the welder guys ticket details
- joelbrown
- Financial Member
- Posts: 293
- Joined: Wed Jul 25, 2012 2:16 pm
- aka: Joel
- Location: christchurch
- Location: Templeton
- Contact:
Re: WTB: coilovers to suit b210, s13 camber plates
http://www.isccoilovers.com.au/isc-coilover-pairs" onclick="window.open(this.href);return false;
they sell pairs from $599
they sell pairs from $599
1990 1200 ute