Page 2 of 2
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Sun May 23, 2010 1:17 pm
by nosebleed
do you make up these adaptors plates?
are they the same for 510's?
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Tue May 25, 2010 7:36 pm
by Bartman
I don't know about their compatability with 510 struts sorry. Apart from needing to change the spring perches, 280zx struts are a good upgrade for 1600's.
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Sat Jun 05, 2010 12:58 pm
by Datto1200
hi i'm after the brakets for s13 brakes to fit onto 1200 struts. can you make them and how much
Cheers
Jay
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Thu Jul 19, 2012 6:38 pm
by EMs SR1200 UTE
After some minor research, I found a wrecked 910 bluebird, scored the struts and then found some R31 skyline calipers and it all bolts up. You just have to change the spring setup, which is where you get adjusys made up.
Either setup shud be as good as each other.
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Tue Jul 09, 2013 7:33 pm
by my1200
Hi people will S13 disks and calipers fit on sunny struts.
I have just purchased sunny struts and S13 as above.
Keen to see if two will go together
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Wed Jul 10, 2013 9:15 pm
by Bartman
They can work, although one of the adapter plate to strut holes needs to either be slotted, or drilled to suit. (Project 1200 ute did this)
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Wed Jul 10, 2013 10:43 pm
by my1200
Can ya make plates to suit without slotting.?
Keen as.
Re: S13 front brake upgrade for datsun B110/B210's.
Posted: Thu Jul 11, 2013 7:51 pm
by Bartman
It's doable. But I don't have the time to make variations. I could do a pair with only one of the mounting holes drilled.