Page 114 of 125
Re: Datto_610's 180B - Street Legal!
Posted: Tue Mar 21, 2017 6:19 pm
by Datto_610
Bcpr7es so should be .9mm. When the pipe blew off I had Bcpr6es-11 plugs in so 1.1mm gap. I was advised by some people at work and reading online that turbo motors don't like big spark gap hence changeing to smaller gap and also run a cooler plug but from what I've read that is more for higher boost applications(which I plan on doing later down the track)
Re: Datto_610's 180B - Street Legal!
Posted: Tue Mar 21, 2017 8:10 pm
by torqued
Did you check before fitting?
Re: Datto_610's 180B - Street Legal!
Posted: Tue Mar 21, 2017 10:00 pm
by Datto_610
Well no...
Re: Datto_610's 180B - Street Legal!
Posted: Wed Mar 22, 2017 10:09 pm
by 2 doors
blew the pipe off the turbo? which pipe, did it backfire or something? has it damaged the compressor on the turbo somehow ?
Re: Datto_610's 180B - Street Legal!
Posted: Thu Mar 23, 2017 7:55 am
by Datto_610
Yeah pipe coming off the turbo going to intercooler. Possibly? Anyway to tell rather than removing turbo?
Re: Datto_610's 180B - Street Legal!
Posted: Thu Mar 23, 2017 9:32 am
by classicdat
Running rough and Misfire sound like a sensor to me, maybe plugs but all you will need to do on one of these flash 'Ingected' things is plug in your OBDII and read the codes
Re: Datto_610's 180B - Street Legal!
Posted: Thu Mar 23, 2017 10:12 am
by Datto_610
Ha! Na mate no OBDII on this oldschool Nissan efi. The ecu does have a diagnostic mode on it which I tried last night and if I did it correctly came up with code 13 coolant temp sensor, code 34 knock sensor and code 43 tps sensor.... BUT I could be wrong
Re: Datto_610's 180B - Street Legal!
Posted: Thu Mar 23, 2017 10:42 am
by torqued
TPS and knock sensor are interesting.
Re: Datto_610's 180B - Street Legal!
Posted: Thu Mar 23, 2017 10:50 am
by classicdat
Coolant one could explain cold running, have you checked the connection?
Re: Datto_610's 180B - Street Legal!
Posted: Thu Mar 23, 2017 12:11 pm
by Datto_610
I've unplugged it while running and plugged it back in which didn't seem to make a difference either way. The plug itself is a bit damaged but I still believe it is making contact. I've check resistance while warm on temp sensor and got 0.3 with multimeter set to 20k ohms. Haven't checked it cold yet