Re: Garth's 4age B110
Posted: Sun Mar 06, 2011 7:49 pm
looking good nick!
Page 16 of 18
Re: Garth's 4age B110
Posted: Sun Mar 06, 2011 8:52 pm
fired an email to becarparts to see if they have sills other wise I might just get some more steel and fold my some myself.
Re: Garth's 4age B110
Posted: Sun Mar 06, 2011 9:17 pm
cool, there are invercargil ones on trademe at the moment for $145 but i guess shipping be an arse on them. Let me know what ever will be easiest for you
Re: Garth's 4age B110
Posted: Mon Mar 07, 2011 9:08 pm
Picked up these today.
They are for a 1200 ute so are too short for a sedan, they only go to the b pillar. but thats all good. it has all the fron half.
Got them from BE Carparts for $55 a side
Tomorrows job is to start installing the passenger one.
They are for a 1200 ute so are too short for a sedan, they only go to the b pillar. but thats all good. it has all the fron half.
Got them from BE Carparts for $55 a side
Tomorrows job is to start installing the passenger one.
Re: Garth's 4age B110
Posted: Fri Mar 11, 2011 4:57 pm
Well as in the above posts, tomorrows welding it on turned into tomorrows drinking with flatmate.
So I welded it on today, will have more to update next week
Will fold up the back half next, then its the other side to do.
So I welded it on today, will have more to update next week
Will fold up the back half next, then its the other side to do.
Re: Garth's 4age B110
Posted: Sun Mar 27, 2011 10:46 am
passenger side is complete getting started on drivers side. Spent all of yesterday cutting out stuff and cleaning up getting ready to do some tacky tacky today.
The guy who did the "repairs" on this should be shot!
He told garth he was a panel beater. Panel beater my fucking ass. He hasn't cut out a single piece of rust. Just tacked steel in over top of rust and caked on seam sealer/bathroomm RTV and house paint.
One patch was made of 2mm galv! wtf! Some people are fucking retards
Any way, i'll have some more pictures to up date later today.
The guy who did the "repairs" on this should be shot!
He told garth he was a panel beater. Panel beater my fucking ass. He hasn't cut out a single piece of rust. Just tacked steel in over top of rust and caked on seam sealer/bathroomm RTV and house paint.
One patch was made of 2mm galv! wtf! Some people are fucking retards
Any way, i'll have some more pictures to up date later today.
Re: Garth's 4age B110
Posted: Sun Mar 27, 2011 11:02 am
Hahaha in a way it was fun yesterday seeing what sort of muppet work we would uncover the further you cut into it. Lucky I now have someone who knows what they are doing on the case!
Re: Garth's 4age B110
Posted: Sun Mar 27, 2011 11:14 am
You guys are doing a great job on the rust repairs.
I had enough dam trouble filling in some holes, how the hell you guys make it look so easy is beyond me.
Keep it up !
I had enough dam trouble filling in some holes, how the hell you guys make it look so easy is beyond me.
Keep it up !
Re: Garth's 4age B110
Posted: Sun Mar 27, 2011 11:26 am
Haha its all nick, that guy has some skills! All I do is watch what he does and look good, I will add I am really good at that part though.
Re: Garth's 4age B110
Posted: Sun Mar 27, 2011 7:57 pm
Passenger side done
Innser sill near b pillar
Under dash
Drivers side, I thought needed a bigger hole than the passengers side
The awesomeness that is the previous owners repair
Got the drivers inner sill/a pillar area done.
Did some work down the other end of the sill uder the rear seat/innear sill area which had just disintergrated from rust. But not really much to show there
Innser sill near b pillar
Under dash
Drivers side, I thought needed a bigger hole than the passengers side
The awesomeness that is the previous owners repair
Got the drivers inner sill/a pillar area done.
Did some work down the other end of the sill uder the rear seat/innear sill area which had just disintergrated from rust. But not really much to show there