Page 3 of 6

Re: My p610 Coupe (Hopefully to be the project....)

Posted: Fri Jun 15, 2012 6:02 pm
by skutaman
Datto_610 wrote:If you do want to sell the dash and gauges etc Im pretty keen just let me know. Otherwise Im after a demister relay if it has one should be under the dash somewhere I think.
Ok sweet, do you know where abouts the relay should be?
And I'll let you know about the dash as soon as I know if my mate wants it or not.
He, understandably, wants to have a look at it first. Hes got the NZ new round dial dash.

Re: My p610 Coupe (Hopefully to be the project....)

Posted: Fri Jun 15, 2012 6:13 pm
by Datto_610
Yeah thats ok. I think relay is under the dash close to the demister switch which is next to the pull knobs for headlights and window wipers.

Re: My p610 Coupe (Hopefully to be the project....)

Posted: Fri Jun 15, 2012 6:30 pm
by skutaman
Sweet man, I'll have a look next time I'm at the shed :thumbsup:
I'm going to take photos of the interior etc now that its cleaned out, on either sunday (If I have enough light after work)
Or tuesday, at which time I will be striping the interior anyway... :highfive:

Re: My p610 Coupe (Hopefully to be the project....)

Posted: Fri Jun 15, 2012 6:33 pm
by Datto_610
Awesome I look forward to seeing some pictures!

Re: My p610 Coupe (Hopefully to be the project....)

Posted: Fri Jun 15, 2012 6:36 pm
by skutaman
Anything specific anyone what shots of?
Just let me know, and I get one.

Re: My p610 Coupe (Hopefully to be the project....)

Posted: Fri Jun 29, 2012 2:39 pm
by skutaman
Datto_610 wrote:Awesome I look forward to seeing some pictures!
Here's some pics of the dash Greg. I've got it out now.
I forgot to have a look for the demister relay, but seeing as there is a factory demister on the window, it's bound to be there...
I pulled it out bit by bit, not knowing I could pull it out in one piece lol
IMG_2069.JPG
IMG_2071.JPG
IMG_2070.JPG
IMG_2073.JPG
I know the badge is missing from the dash above the glove box (As above) I can get one if needed... :thumbsup:
IMG_2074.JPG
IMG_2075.JPG
IMG_2076.JPG
I have the heater surround aswell, just not in the photo.
IMG_2077.JPG
All of the air vents are there and in good condition.
The only two pieces missing from the upper dash is the ash tray and the badge on the passengers side above the glove box.
I didn't get photos of the lower dash (My camera died... :( )
The vinyl on the top of the dash is there, but needs a re-trim. The plastic sections on the top of the dash are there and in good condition, no broken mounts etc.
I have the main dash support aswell, bit of rust in it. And I don't know if any one wants it Lol

I got the rear pillar trims out in one piece :dance2: They are alguds, the front screw mounts (Recessed mounts)
are broken, but repairable!

I have next week off, so I'm going to get it stripped and dispose of the body, unless there is any panels some one wants.
But, I need to know ASAP!
All the suspension, motor, bumpers (Which are pretty bad) drive shafts, seats, hood lining and various other little bit of remaining chrome and things will be removed and up for grabs.

I do need to move as much as possible soon, so get in guys!
Just let me know what your after, and an offer (I don't know what half of these bits are worth! LOL)

Re: p610 SSS Coupe parting out...

Posted: Wed Jul 04, 2012 1:13 am
by skutaman
I've got all the glass out today, I was actually scared by how easy the rear window came out!
I'm surprised it didn't fall out and smash while towing it to the shed! lol
Got the roof lining and gas tank etc out as well.

Here's some pics :) (Mainly for Bluebird_U)
IMG_2078.JPG
IMG_2079.JPG
IMG_2080.JPG
IMG_2081.JPG
IMG_2082.JPG
IMG_2083.JPG
IMG_2084.JPG
IMG_2085.JPG
IMG_2086.JPG
IMG_2087.JPG
IMG_2088.JPG
Here's the door handles, their in good condition :thumbsup:
IMG_2090.JPG
IMG_2091.JPG

Re: p610 SSS Coupe parting out...

Posted: Fri Jul 06, 2012 12:39 pm
by skutaman
So is anyone interested in anything particular? I'm wanting to move the body quickly to save on storage costs...
If anyone wants any body parts (not that there are many worth taking) I need to know asap!
I'm hoping to depose of the body in the next 3 weeks. So let me know soon.
All the rest is being stripped out, I have all of the side glass (With mechs) rear window (With demister)
All the rear interior linings, roof lining, complete dash (Wiring, vents the lot) drivers door card,
All the seats (all need some retrimming, mainly the fabric down the center.)
Three of the glass head lights. fuel tank with all pipeing (filler pipe with vent, breather hose etc...)
And lots of other bits...
Just ask and I'll let you know if I've got it. :thumbsup:

Re: p610 SSS Coupe parting out...

Posted: Fri Jul 06, 2012 7:25 pm
by crustywhip
Dont scrap the body. find some one with a farm and park it under a tree. Return it to the ground and not a suzuki.

Re: p610 SSS Coupe parting out...

Posted: Fri Jul 06, 2012 7:54 pm
by torqued
crustywhip wrote:Dont scrap the body. find some one with a farm and park it under a tree. Return it to the ground and not a suzuki.
:lol: :lol: :lol: