Re: Monty's 180b
Posted: Thu Sep 04, 2008 6:48 pm
hey there, lookin good, great to see others making progress on their cars ,might inspire me to get off my butt and do something on mine.
Page 3 of 8
Re: Monty's 180b
Posted: Thu Sep 04, 2008 6:55 pm
No prob, think 910 struts have the same bolt spacing as the struts you got.
Re: Monty's 180b
Posted: Fri Sep 05, 2008 10:08 am
from memory they are 89mm spacing but i'll double check next time there out
Re: Monty's 180b
Posted: Wed Sep 17, 2008 8:04 am
ok so now i'm guna come on the cruise i need a list of things left to do
brake brackets - in progress
drivers seat mount - in progress
my park lights come on when i use the brake - it'll be right for now
remount center console
secure parcel tray and speakers
plug up old fuel exit hole
split pins in the steering arms
get tyre changed back over
mount fire extinguisher
i just realised that i'm going to have to find another spare exactly like i have got as my wheels, because if i get a flat i have to have the same tyres on the back for the lsd, and i can't run anything smaller than a 15 on the front because of the brakes hmmmmmmmmm
oil change
spanner check EVERYTHING
and a bit of drive time to check everthings ok.
brake brackets - in progress
drivers seat mount - in progress
my park lights come on when i use the brake - it'll be right for now
remount center console
secure parcel tray and speakers
plug up old fuel exit hole
split pins in the steering arms
get tyre changed back over
mount fire extinguisher
i just realised that i'm going to have to find another spare exactly like i have got as my wheels, because if i get a flat i have to have the same tyres on the back for the lsd, and i can't run anything smaller than a 15 on the front because of the brakes hmmmmmmmmm
oil change
spanner check EVERYTHING
and a bit of drive time to check everthings ok.
Re: Monty's 180b
Posted: Wed Sep 17, 2008 10:29 am
TRX wheels will fit.
Re: Monty's 180b
Posted: Thu Sep 18, 2008 10:36 am
um whats a trx wheel?
anyway found a vid of the old beast before it came off the road with the head work done on the l18
http://s213.photobucket.com/albums/cc21 ... dstart.flv" onclick="window.open(this.href);return false;
anyway found a vid of the old beast before it came off the road with the head work done on the l18
http://s213.photobucket.com/albums/cc21 ... dstart.flv" onclick="window.open(this.href);return false;
Re: Monty's 180b
Posted: Sun Sep 21, 2008 10:50 pm
u11 bluebird styles. 1982-1984 me thinks but I am not sure. Like this one
http://www.trademe.co.nz/Trade-Me-Motor ... 915839.htm" onclick="window.open(this.href);return false;
http://www.trademe.co.nz/Trade-Me-Motor ... 915839.htm" onclick="window.open(this.href);return false;
Re: Monty's 180b
Posted: Thu Jul 16, 2009 8:42 am
ok its been a while since i've put a post up so whats new
hyd handbrake fitted and rocks!!
r32 rear sus in but too high but a much better spring rate
found the problem with the clutch, some idiot told me to put some washer in there luckily it didn't stuff anything
cold air box made
so now the rear end coming out and will be rebushed and hopefully fix my toe issuses
gearbox out again for clutch boot and spignot bearing
but now i'm finallly starting to get to drive it Still not legal so not very often but it is sooooooooooooooooooooooooooooooooooooooo much fun:)
hyd handbrake fitted and rocks!!
r32 rear sus in but too high but a much better spring rate
found the problem with the clutch, some idiot told me to put some washer in there luckily it didn't stuff anything
cold air box made
so now the rear end coming out and will be rebushed and hopefully fix my toe issuses
gearbox out again for clutch boot and spignot bearing
but now i'm finallly starting to get to drive it Still not legal so not very often but it is sooooooooooooooooooooooooooooooooooooooo much fun:)
Re: Monty's 180b
Posted: Thu Jul 16, 2009 8:49 am
Re: Monty's 180b
Posted: Thu Jul 16, 2009 5:15 pm
that looks sick with the drift teks on it. whats the clearance like on the rear?