Page 7 of 17

Re: Club car coming together

Posted: Wed Aug 29, 2012 9:07 pm
by my1200
hey we are trying to finish off the club car motor and we currently have it a Spec Performance
and we are not getting enough fuel in the top end range and its running lean.
Also we will require a different dizzy as its been spot welded.
Once the car is running we plan on doing some events this summer.
I mentioned I was selling my cars and this is still a real possibility but, I would
like to finish both in the next few months.
Does anyone have thoughts on our lean fuel situation ??
we have filed the needle and opened up the seat etc. hmmmmm

Re: Club car coming together

Posted: Wed Aug 29, 2012 9:16 pm
by classicdat
What fuel pump are you using? I used to run out of fuel using a std pump,

Re: Club car coming together

Posted: Wed Aug 29, 2012 9:21 pm
by my1200
good question ? i know its after market but cant tell you the pressure etc.

Re: Club car coming together

Posted: Fri Aug 31, 2012 9:44 pm
by Bartman
Do you know what revs/hp your making when it begins to lean out?
My A15 used to hit the wall at 6000rpms. I upgraded to 3/8 fuel line (Including the pickup in the tank) and fitted a big holley fula pump. It never happened again.

Re: Club car coming together

Posted: Tue Sep 04, 2012 11:07 pm
by 510-077
It's looking very good I think u came into my shop.I had a photo up on the net of my race car.go have a look at my one and u will know what one it is.but yr car is looking cool m8 be good to see it doing some laps...

Re: Club car coming together

Posted: Sun Sep 09, 2012 8:47 pm
by my1200
Got home and changed to fuel and found the electrics needed some work.
Got to be something simple ie the manual on off switch and some wiring issues.
Part from that pretty happy to get a hundy at the back wheels at 5000 rpm
and it did not get there smoothly at all.
Also we have decided to change the wheels and man reckon it looks sick
on the 15inch.

Image
Image
Image
Image

Re: Club car coming together

Posted: Sun Sep 09, 2012 10:26 pm
by dattoboy
Looks great on the 15s Aaron. Do you have a print out of the dyno sheet you could post up? Any videos on the dyno or anything?

Re: Club car coming together

Posted: Sun Sep 09, 2012 10:27 pm
by classicdat
my1200 wrote: Also we have decided to change the wheels and man reckon it looks sick
on the 15inch.
:agree:

Re: Club car coming together

Posted: Mon Sep 10, 2012 4:51 pm
by my1200
Yeah Bebe should have a vid or two, Mate figured out the problem we had
wasnt the wiring the Alternator is not charging etc therefore really week spark.
Also fuel was fucked so with new gas and some spark it will run fine.
Taking to another place to be looked over.
150 at the wheels is the target.

Re: Club car coming together

Posted: Mon Sep 10, 2012 6:33 pm
by brocky41
Looks great dude, love the pinstripes really breaks it up a
Can't wait to line this thing up against the Y :burnout: .