Page 90 of 125
Re:
Posted: Sun May 15, 2016 1:30 pm
by 2 doors
Datto_610 wrote:Also after it locked up we jacked the rear end up and could only just turn the wheels, jacked the front and both sides were jammed on faaaaarking tight and only released when djz unbolted the master from the booster. Jeez I'm going to be brake expert by the end of this. After chatting to Shane from Safe R Brakes on Friday about my situation he bloody offered me a job hahaha
Do they do playing? If so take it.
Posted: Mon May 16, 2016 12:58 pm
by Datto_610
Alright! Problem is solved! Brake booster push rod was too long so Bart machined it down and thus solved the issue! Went for a decent hoon around the block and all was good so went for a bigger hoon round the back streets near Wals place and no brake troubles!!! Big thanks to Bart and DJZ for coming over to help me out on sat muchly appreciated! One stink buzz thing is that either the turbo or rings are poked as it blows a bit of blue.... I'll just keep an eye on oil consumption for the time being and maybe try a thicker grade currently running penrite 10W50 might change to a 15W60 and add some Proma MBL8 oil additive. So all that's really left is fit sun visors, fill w/cooant, change the keeper springs to the longer Jamex ones I have as it's not quite captive... tidy up a few things. Speedo is at Parrots getting calibrated so hopefully have that tomorrow. May hook up the tacho if I can figure out which wire it is too. So all on track so far for Friday! I do need a car trailer to borrow though. Got a tow vehicle sorted just need a trailer!
Re: Datto_610's 180B - Cert Prepping!
Posted: Mon May 16, 2016 7:20 pm
by Bartman
Maybe see if karl can get his mates one?
Re: Datto_610's 180B - Cert Prepping!
Posted: Mon May 16, 2016 9:09 pm
by 2 doors
Thought you were going to use mine ? It's rego,s and wofed
Posted: Mon May 16, 2016 9:12 pm
by Datto_610
Shit sorry Wal must've forgot that was on offer! I'll take it if the offer still stands!
Re: Datto_610's 180B - Cert Prepping!
Posted: Mon May 16, 2016 9:16 pm
by 2 doors
Of course it still stands,
Posted: Tue May 17, 2016 3:31 pm
by Datto_610
Excellent!
Posted: Tue May 17, 2016 9:10 pm
by datsunboy
Bart said something about the tacho sitting at 4500 rpm all the time? It might still have the calibration programme on it.....may need to bring it past my place haha
Sent from my SM-G920I using Tapatalk
Re: Datto_610's 180B - Cert Prepping!
Posted: Thu May 19, 2016 6:17 pm
by DJZ
All set for the big day Greg?
Re: Datto_610's 180B - Cert Prepping!
Posted: Fri May 20, 2016 7:59 am
by tlssunny
D DAY GREG................ hope ya packing a extra pair!!!!!!!!!!!!!!!!! cant wait to hear how the 180b does