EOI - My sidedraught set up
Posted: Sun Feb 21, 2010 9:41 am
Looking at possibly moving on my Dellorto setup, due to nneed for dunding for new induction system plans.
Very clean pair of sideys here, recently tuned by Wayne "Noddy" Murdoch.
40mm Dellortos, running on my A12, but choked for A14/A15 size
Main Jet Setup; Emulsion Tubes = 7772.5, Air Corrector = 160,Jets = 130
Idle Jet setup = 7850.1 / 48
Needle Valve = 150
Velocity stacks, fuel lines etc
Overhaul kit fitted & installed
Got some boxey redline filters and also some slimline oval K&N's, A series round port and (ported) oval port manifolds for A14/A15 heads.
PM or email me if you are interested - note I will not be giving these away!
Very clean pair of sideys here, recently tuned by Wayne "Noddy" Murdoch.
40mm Dellortos, running on my A12, but choked for A14/A15 size
Main Jet Setup; Emulsion Tubes = 7772.5, Air Corrector = 160,Jets = 130
Idle Jet setup = 7850.1 / 48
Needle Valve = 150
Velocity stacks, fuel lines etc
Overhaul kit fitted & installed
Got some boxey redline filters and also some slimline oval K&N's, A series round port and (ported) oval port manifolds for A14/A15 heads.
PM or email me if you are interested - note I will not be giving these away!