Page 1 of 1
z18et
Posted: Wed Dec 08, 2010 7:33 pm
by jasace
hi guys i hav had one plug that up to now i didnt know what it was for but now i do. lol but i dnt hav the part.
So im after i think this is what is is called?
im after a injector bellles pack?
All i know is its i lil alloy box thing that is found on the fire wall norm & has a five wire plug on it & it drops the 12v down to 6v or what eve volts the injectors run on? Any help
Re: z18et
Posted: Wed Dec 08, 2010 8:52 pm
by datsunboy
you can run one from almost any other Nissan....keep that in mind.
Just check with an Ohm meter first (get mikewasowski to check his one for you), and then check ones that you find.
then just re-wire the plug if necessary
They are called resistor packs, or ballast resistors e.t.c.
Re: z18et
Posted: Wed Dec 08, 2010 10:05 pm
by jasace
ok thanks so what year & cars can i look in for 1?
Re: z18et
Posted: Thu Dec 09, 2010 10:00 pm
by datsunboy
dunno man, anything after the early 80's i guess
Re: z18et
Posted: Mon Dec 13, 2010 9:47 pm
by jasace
wood a ca18det out of a exa or s13 b ok
?
Re: z18et
Posted: Tue Dec 14, 2010 8:46 pm
by datsunboy
most likely man.
as I said, get mikewasowski to check his for you, then check the one you want to buy
Re: z18et
Posted: Mon Dec 20, 2010 7:50 am
by datsunboy
I just found written in my notes of CA stuff, that an E15ET resistor pack is the same and will work
Re: z18et
Posted: Mon Dec 20, 2010 11:25 pm
by jasace
datsunboy wrote:I just found written in my notes of CA stuff, that an E15ET resistor pack is the same and will work
chairs thanks
Jasace