Big ish single pot brakes,5stud z31 hubs & 274x20 rotors
Posted: Sun Feb 27, 2011 2:45 pm
I haven't really decided what I'm doing with my old brake setup but I doubt I am every really going to do anything with them.
I have
2x sets of single pot calipers - $100 for the lot inc the newish pads.
1st set has been on my car and is working well with new pads only done 3000kms
2nd set was off a parts car and is sitting out in the hay-barn - same as photo above but they are a bit dirtier
1x set of Z31 5 Stud Pentagon front hubs & matching set of 274x20mm rotors, these were machined 3000kms ago and seem to be in good condition.
$125 for the hubs or $150 for hubs and Rotors as a set
Hubs are stripped bare and do not include any wheel bearing parts.
I also have Z31 front strut tubes I am intending to keep these - but anything is for sale at he right price. I sort of want to keep these but I am not really using them, they include blown shocks and the hard to find gland nuts.
EDIT > They are the Larger version which measures out to be 54mm diameter along the strut tube.
they are the same as this photo but they are all dirty and not painted up like my sample photo
for more info on the z31 front struts see this topic
http://www.nzdatsun.com/forums/viewtopi ... 7&start=10" onclick="window.open(this.href);return false;
OR Somebody can take the whole lot away for $300 - which would include z31 struts, 2 sets of calipers and a good set of rotors and pads.
This old setup worked bloody well, my Z weighs a hell of a lot more than most datsun's so this could be a good upgrade for somebody wanting to go bigger brakes without going extreme
and of course if somebody wanted to upgrade further at a later date these parts could be used to do the conversion i have done which is here > http://www.nzdatsun.com/forums/viewtopic.php?f=7&t=2187" onclick="window.open(this.href);return false;
I have
2x sets of single pot calipers - $100 for the lot inc the newish pads.
1st set has been on my car and is working well with new pads only done 3000kms
2nd set was off a parts car and is sitting out in the hay-barn - same as photo above but they are a bit dirtier
1x set of Z31 5 Stud Pentagon front hubs & matching set of 274x20mm rotors, these were machined 3000kms ago and seem to be in good condition.
$125 for the hubs or $150 for hubs and Rotors as a set
Hubs are stripped bare and do not include any wheel bearing parts.
I also have Z31 front strut tubes I am intending to keep these - but anything is for sale at he right price. I sort of want to keep these but I am not really using them, they include blown shocks and the hard to find gland nuts.
EDIT > They are the Larger version which measures out to be 54mm diameter along the strut tube.
they are the same as this photo but they are all dirty and not painted up like my sample photo
for more info on the z31 front struts see this topic
http://www.nzdatsun.com/forums/viewtopi ... 7&start=10" onclick="window.open(this.href);return false;
OR Somebody can take the whole lot away for $300 - which would include z31 struts, 2 sets of calipers and a good set of rotors and pads.
This old setup worked bloody well, my Z weighs a hell of a lot more than most datsun's so this could be a good upgrade for somebody wanting to go bigger brakes without going extreme
and of course if somebody wanted to upgrade further at a later date these parts could be used to do the conversion i have done which is here > http://www.nzdatsun.com/forums/viewtopic.php?f=7&t=2187" onclick="window.open(this.href);return false;