FS: Datsun and loads of Misc stuff, have a look! - AUCKLAND
Posted: Fri Nov 25, 2011 1:33 pm
Please read all of section before asking questions. Will likely list most parts on Trademe in the next few days. May possibly have other Datsun parts kicking around I am willing to get rid of, worth asking but my stocks are depleting as I become less of a filthy Datsun part whore 
PICK UP IS AUCKLAND - Will post most items at buyers expense, please don't ass me around getting postage quotes if you're not going to buy the item!
I AM NEGOTIABLE ON PRICE FOR MOST ITEMS, SOME NOT SO MUCH.
CONTACT ME VIA PM IF INTERESTED IN ITEM
Datsun A series 4 Speed Gearbox
56 Series. Came from behind my Datsun 1200 truck A12. Has about 80-90,000 kms on it so should be very good. Has been sitting for some time however. No selector or fork assem.
Can post at buyers expense but prefer pickup
$175 will take it
NEW ACL Protec Piston Rings for A15
Part number RS84034 - STD
New in box, never used
$60
Datsun Sunny B310 Steel wheels
4x114.3, silver, a pair
Have tires on them, something like 175/70 or similar large profile standard style tires. Medium tread from memory.
$50 for the pair
Also have a standard 12" Datsun 1200 steel wheels kicking about with tires if anyone is interested.
Datsun 1200 B120 B110 Heater core - Cranks the heat still!
No longer fits the tunnel I made for my SR swap. Good condition, brown cover plate otherwise rest is black.
Worked mint when the A12/A15 was still in there, no leaks. Was perfect in Winter getting out the 2 degree surf.
$60
SR20DE Standard Exhaust Manifold
Cast iron stock item. Twin exit. From an S14 SR. One of the studs has broken off.
$45
A15 Standard Exhaust Manifold
Cast Iron. Version WITHOUT the connection to the inlet manifold like A12 has.
$30
A12 Standard Exhaust Manifold
Cast Iron. Version WITH the connection to the inlet manifold.
$20
A Series timing cover
Stock item. Previous owner painted blue with crappy paint which is pealing off, would be easy to strip and make look like a crisp $100 note.
$10
A15 Standard Alloy Inlet Manifold
Version WITHOUT exhaust manifold connection
$15
LOADS! of Datsun 1200 truck door cards
Pretty much all of them are brown, some very good condition, others pretty average
$10 a pair
B110 Sway bar
Stock item, may have brackets but would have to look.
$20
A12 Backing plate - sandwich plate between gearbox and engine
The version which is a semi circle shape, not the full circle shape like A15.
Bit greasy but otherwise good to go
$10
A Series Rocker Cover
Can't remember if it has Nissan or Datsun in the top, could check for those interested.
Has surface rust but is restorable. Comes with oil filler cap.
$25
Misc stuff, make an offer
A Series oil pump
2" SU carb
2x B110 ignition coils
A series engine mounts
A series water pump pulley
Factory S13 radiator
B310 gearbox mount (part with rubber bit in it rather than the bit that bolts to the tunnel)
Get at me
PICK UP IS AUCKLAND - Will post most items at buyers expense, please don't ass me around getting postage quotes if you're not going to buy the item!
I AM NEGOTIABLE ON PRICE FOR MOST ITEMS, SOME NOT SO MUCH.
CONTACT ME VIA PM IF INTERESTED IN ITEM
Datsun A series 4 Speed Gearbox
56 Series. Came from behind my Datsun 1200 truck A12. Has about 80-90,000 kms on it so should be very good. Has been sitting for some time however. No selector or fork assem.
Can post at buyers expense but prefer pickup
$175 will take it
NEW ACL Protec Piston Rings for A15
Part number RS84034 - STD
New in box, never used
$60
Datsun Sunny B310 Steel wheels
4x114.3, silver, a pair
Have tires on them, something like 175/70 or similar large profile standard style tires. Medium tread from memory.
$50 for the pair
Also have a standard 12" Datsun 1200 steel wheels kicking about with tires if anyone is interested.
Datsun 1200 B120 B110 Heater core - Cranks the heat still!
No longer fits the tunnel I made for my SR swap. Good condition, brown cover plate otherwise rest is black.
Worked mint when the A12/A15 was still in there, no leaks. Was perfect in Winter getting out the 2 degree surf.
$60
SR20DE Standard Exhaust Manifold
Cast iron stock item. Twin exit. From an S14 SR. One of the studs has broken off.
$45
A15 Standard Exhaust Manifold
Cast Iron. Version WITHOUT the connection to the inlet manifold like A12 has.
$30
A12 Standard Exhaust Manifold
Cast Iron. Version WITH the connection to the inlet manifold.
$20
A Series timing cover
Stock item. Previous owner painted blue with crappy paint which is pealing off, would be easy to strip and make look like a crisp $100 note.
$10
A15 Standard Alloy Inlet Manifold
Version WITHOUT exhaust manifold connection
$15
LOADS! of Datsun 1200 truck door cards
Pretty much all of them are brown, some very good condition, others pretty average
$10 a pair
B110 Sway bar
Stock item, may have brackets but would have to look.
$20
A12 Backing plate - sandwich plate between gearbox and engine
The version which is a semi circle shape, not the full circle shape like A15.
Bit greasy but otherwise good to go
$10
A Series Rocker Cover
Can't remember if it has Nissan or Datsun in the top, could check for those interested.
Has surface rust but is restorable. Comes with oil filler cap.
$25
Misc stuff, make an offer
A Series oil pump
2" SU carb
2x B110 ignition coils
A series engine mounts
A series water pump pulley
Factory S13 radiator
B310 gearbox mount (part with rubber bit in it rather than the bit that bolts to the tunnel)
Get at me
