Longer Wheel Studs
Posted: Tue Dec 04, 2012 1:30 pm
Does anyone know where i can get longer studs for my datsun 1200..? Studs on it are too short for the 5mm spacer and new rims. 
Page 1 of 2
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 4:57 pm
I brought some in Wellington but the place has closed down now, its called sks bearings.
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 7:19 pm
i got my ones for my 1200 just through repco. flat mate is the manager there so managed to get me a good price but yeah your local repco has them. the ones i have a ridiculously long however
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 7:44 pm
Cheers ill call into repco tomorrow and try my luck
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 7:59 pm
Last set i got from these guys as i found repco expensive
http://www.trademe.co.nz/motors/car-par ... 119872.htm" onclick="window.open(this.href);return false;
http://www.trademe.co.nz/motors/car-par ... 119872.htm" onclick="window.open(this.href);return false;
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 8:29 pm
R32,A31,S13 etc wheel studs are a little bit longer than the standard ones.
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 8:37 pm
If you only need about 10mm then you can get them also from driven performance
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 9:28 pm
I can get them at not bad rates. If you tell me what you need i can price them
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 9:32 pm
Highly Recommend Craig, for all your automotive bits and delivered to your door probably never go to repco againhsepwr wrote:I can get them at not bad rates. If you tell me what you need i can price them
Re: Longer Wheel Studs
Posted: Tue Dec 04, 2012 10:32 pm
If this was Facebook I would hit like but will have to settle with I agree.sr1600 wrote:Highly Recommend Craig, for all your automotive bits and delivered to your door probably never go to repco againhsepwr wrote:I can get them at not bad rates. If you tell me what you need i can price them