New Zealand Datsun Club

Here's my old shell. Its rusty and not straight. It will need a truck load of work to get back on the road. Its about 20min shorter on the left hand rear vs the right hand rear and about 10-15mm shorter on the right hand front vs the left hand front. Im guessing that before I got it, it had been in an accident and the repairs that were done on it at that time arent that flash. The left A pillar is not flash. The right hand side boot area isnt good either. I welded a new front radiator support panel on it, before I fully knew about all the issues this shell had.

I was going to cut it up and use some of the panel bits to fix my other shell, but thought it best to offer it up on here first.

Personally, I'd would not want to see this shell back on the road. As I feel its stuffed.

I have no idea on what the bare shell is worth, but someone might be will to pay something for it or if you are wanting a project.........

I can sell all the bits need to make it into a complete car. Live plates. All the panels and glass. There wont be much of an interior, just seats, dash, loom etc, but enough to get it going. Ive got a early model A12 and 4 speed that can come with it. Standard suspension front and rear. Lights etc etc.....

Any questions, just ask or PM me.

Open to all cash offers, not really interested in deals or swaps......

Are the panels any good on it?

The boot lid would be the best panel on the car, bonnet is very usable, but I did put a skim of bog on some parts of it, the 4 doors, which I havnt really looked at for years, might have the odd bit of rust spots around the bottom of them and there is also some bog in them.

Sorry, I ment the panels on the shell....rear 1/4s etc

The roof is good, rear 1/4 panels below the body line thing have bog and rust, but above are okish. The left rear around the tail light has abit of bog. Rear wheel arches will need work(see pictures).

Transport and storage is a problem.....

Sorry I cant help you with that.