New Zealand Datsun Club

So I have r31 struts and brakes with 89mm mount.

The flat mounton my 15 inch star sharks hit the brake callipers.

What are my options to replace the callipers with a lower front facing profile that will mount on these shocks?

Edit* to shrink the picture

Im running S4 RX7

Thanks Adam. They certainly look like they stick out less than my clunkers!
Check out the surface rust on these bitches. Shows how long it has been since they have seen some use. Had them machined 3 years ago now!

Datsunboy was able to find some rotors with an unusually tall hat for spoke clearance. But other than that his setup is totally different.

Yeah yours are r31 front struts/brakes

Where as torqued (adams?) are a volvo disc? with a mazda caliper and a b310 style hub..

Mine are same setup as adams but with gtst calipers and discs, I snuck a 5mm spacer between the hub and the brake disc, all on the r31 strut...just means that you need to make some brackets to mount the calipers.

sr1600 wrote:Yeah yours are r31 front struts/brakes

Where as torqued (adams?) are a volvo disc? with a mazda caliper and a b310 style hub..

Mine are same setup as adams but with gtst calipers and discs, I snuck a 5mm spacer between the hub and the brake disc, all on the r31 strut...just means that you need to make some brackets to mount the calipers.

910 hubs
Some sort of Vtec honda disc (i have part number somewhere)
s4 RX7 calipers

Lemme know Ging dude if you need anymore details. I gotta get them sitting slightly more flush so going to revisit the bracket shortly

Whoops 910 hubs

When I looked into going rx7 calipers, I looked into the disc sizes and found apart for the obvious fd3s and fc3s disc there was others the same width

E30 BMW+ a couple of others, Volvo 740?? turbo I think and some honda prelude form memory all with various different disc heights.

If anyone has some 910 hubs they want to sell I'm on the lookout for another pair