Does anyone have any oversize a14 pistons in good nick they'd sell? I'm too cheap to buy new ones and my piston to bore clearance is out of factory limits on my spare block.
Either that or does anyone know of pistons that will fit without too much effort and are cheap. Motor will be hot so want similar piston dish to factory for 11:1 ish c/r.
Cheers,
Rob
Oversize a14 pistons
-
volodkovich
- Regular
- Posts: 104
- Joined: Mon Sep 01, 2008 8:48 pm
Oversize a14 pistons
WhitleyTune - Bespoke Camshaft, Valvetrain & Aluminium casting
-
Bartman
- Committee Members
- Posts: 7303
- Joined: Sat Jul 19, 2008 9:04 am
- Location: Datsun City
- Location: Christchurch New Zealand!!!!
- Contact:
Re: Oversize a14 pistons
Alex gallager has a set of .020 A 14 pistons.
They don't call me the man with the rubber arm for nothing you know.............
-
Kitch
- Financial Member
- Posts: 1689
- Joined: Wed Aug 20, 2008 9:29 am
- Location: Timaru
- Location: Timaru
- Contact:
Re: Oversize a14 pistons
I have priced up new ones for my A14, and looking at some mitzi ones for around the $160 mark for the set, but I need to shave 1.2mm off the top of them.
I thought that was cheap enough.
I have about 8 or 9 pistons here, but they are 75.5 & 76.0mm....
I thought that was cheap enough.
I have about 8 or 9 pistons here, but they are 75.5 & 76.0mm....
-
Bartman
- Committee Members
- Posts: 7303
- Joined: Sat Jul 19, 2008 9:04 am
- Location: Datsun City
- Location: Christchurch New Zealand!!!!
- Contact:
Re: Oversize a14 pistons
I don't know about the mitsi pistonsm, but 1.2mm is a lot to remove from the pistons. it might comprimise the the strnegth of the top of the top ring land..............
They don't call me the man with the rubber arm for nothing you know.............