So, decided with wagon in need of repairs I needed a cheap daily to burn round in (abeit very slowly) and something brock can use to take the Y off the road for awhile..
Take one buysell and a small wad of cash, trip out to hillbilly ville and we found this.. Sunny B310 SGX 1200 4 on the floor, bit ratty but that adds to it..After a short trip testing the massive handling potentials of the sunny, with some mild cornering the battery decided it need to go for a wee everywhere after having lunch with the alternator. So with Brock n Lisa following behind the backfiring sunny, pulled over, off with the terminals and promptly roadside removals the battery
So it turned up looking a little something like this:
Then brock decided some widened steels would look trick.
Said nah need to lower it,
Then lowered it some more... (in work time ...) Rear was actually for awhile full length front springs
Just fooling with you, actually borrowed some steels off GC steve, swapped 5 mint free tyres I had lying around onto rims and gave it the bad boy edition look .. Sat like that for a couple weeks while this happened..
13x8 & 13x7 widened steels, a ministockers worst nightmare (actually had one come into work and drop his lip!)
GC Steve exchanged a bumper (sits a bit more flush now) , swapped indicator lenses around to how I thought they should look. Brendan gave it some points and a quick tune. Mounted up a front spoiler brock had lying around doing nothing much, Rewired alternator and replaced regulator, old alternator. Scored a headunit & sounds, wired it all in. Brock did alot've polishing and cleaning. Saw good mate Zac for some seat covers.. Removed mudflaps..
Big big thanks to Steve for coming round and helping with the actual lowering and sorting shocks out for front end. and bedding our tyres in for a day and half on his wagon!
Stay tuned........
Sunny Bogan Faction, Flat Project mk1
Re: Sunny Bogan Faction, Flat Project mk1
im not loving the front lip
- gingofthesouth
- Site Admin
- Posts: 1932
- Joined: Tue Mar 23, 2010 4:06 pm
- aka: Ging
- Location: Lower Hutt
- Contact:
-
- Datsun God
- Posts: 3943
- Joined: Sat Jul 19, 2008 1:35 pm
- aka: leppa
- Location: BLENHEIM
- Contact:
Re: Sunny Bogan Faction, Flat Project mk1
needs a bit more low in the front, and a small duck bill spoiler for the boot. otherwise awesome
- DylPhil7
- Financial Member
- Posts: 1113
- Joined: Fri Jun 19, 2009 8:33 pm
- aka: DylPhil
- Location: Wellington
- Contact:
Re: Sunny Bogan Faction, Flat Project mk1
love it dude! i wanna have the same style for my 310! how much did your widened steelies cost?
and what have you used to lower it??
and what have you used to lower it??
- 85_Z31
- Datsun Master
- Posts: 1494
- Joined: Sun Jul 18, 2010 10:53 pm
- Location: Rangiora North Canterbury
Re: Sunny Bogan Faction, Flat Project mk1
i saw this before the steelies and it was like meh
but now it looks badass, good work boys !
but now it looks badass, good work boys !
The Answer to your Question is NEEDS MORE VG30
Re: Sunny Bogan Faction, Flat Project mk1
im liking all this GC steve stuff
im hanging out to get my own wide steelies now, thanks again for letting me borrow em guys, was hard to give em back
and cant forget this one
ooooohhhh yea
im hanging out to get my own wide steelies now, thanks again for letting me borrow em guys, was hard to give em back
and cant forget this one
ooooohhhh yea
-
- Datsun God
- Posts: 2289
- Joined: Sat Jul 19, 2008 10:19 am
- Location: nothere
Re: Sunny Bogan Faction, Flat Project mk1
Lovn the project boys. !
Also not the biggest fan of the lip
Steve you need to do this too. Ur wagon looks badass on those steels
Also not the biggest fan of the lip
Steve you need to do this too. Ur wagon looks badass on those steels
- gingofthesouth
- Site Admin
- Posts: 1932
- Joined: Tue Mar 23, 2010 4:06 pm
- aka: Ging
- Location: Lower Hutt
- Contact:
Re: Sunny Bogan Faction, Flat Project mk1
How can i get my hands on a set of these widened steelies!
My orangatang 510 here.
-
- Committee Members
- Posts: 7303
- Joined: Sat Jul 19, 2008 9:04 am
- Location: Datsun City
- Location: Christchurch New Zealand!!!!
- Contact:
Re: Sunny Bogan Faction, Flat Project mk1
Eelite wheel co in CHCH can do it for you, or you can have your centers welded into centerless bands,
They don't call me the man with the rubber arm for nothing you know.............