A mix of parts... A series, 280, 510, Sunny + batty seats

[jeremiahnz]

Hi guys,

Have a couple of bits I am flogging to fund the 410. Will chuck them on trademe, but just need to confirm a couple of things. Also open to offers.


First I believe these are 280zx struts and brakes. I was going to try to fit them up to a 410 as I believe the 510 guys use them.... plans changed... if anyone can confirm if they are 280zx struts that would be apprecitated

IMG_0596 (Medium).JPG

IMG_0601 (Medium).JPG

Second I believe to be a B310 cross member. Wanted it to see if mounts were usable on a 410 but weren't. Mounts seem to be in reasonable condition. Again if any one can confirm that would be great.

IMG_0598 (Medium).JPG

Thirdly I have a set of extractors for an A15. Didn't really want to fabricate extractors for an A15 into the 410 but the inner guards and chassis rails had other ideas. I believe these are something like a Genie item. They aren't Coby. There are a couple of dents on a couple of extractors, that may have been the result of someone making some room for some after market carbs. Doubt the dents would make much of a performance difference but that is always subjective....

IMG_0602 (Medium).JPG

Also got some silvertop 4age extractors and ae101 levin rear discs and calipers.

So if anyone is interested in any of the above, please make offers, otherwise if you can help me confirm what the parts are that would be much appreciated.

All parts in AKL

[Bartman]

The hubs look like the hubs on the 280zx struts that I have.

[jeremiahnz]

Thanks Bart,

I actually found the old trademe auction I bought them off and they are definitely 280zx struts

[jeremiahnz]

Extra pic showing dents in the extractors. One is pretty small, the other a bit bigger.

011 (Medium).JPG

[jeremiahnz]

Hey guys,

Also got some batty seats I'll sell. They are in pretty good nick. Come with rails, although one set of rails have been pulled off when I was looking to mount them to another car. Because they have a release mechanism for passengers to get in the back set, a little bit of metal was bent to get the rails off, as opposed to cutting the release wire. It can just be bent back, but thought I'd mention it.

Will try to get some pics up soon. Will sell on here for $175 if anyone wants them, otherwise will go on trademe for $200.

Cheers

[jeremiahnz]

Hey guys,

A few bits on trademe now:

RX7 Batty seats (good for conversions)
AE101 disc brake conversion
4age Extractors:
http://www.trademe.co.nz/Members/Listin ... ber=103644" onclick="window.open(this.href);return false;