WTF!!!!! / FAIL THREAD

[Bartman]

That looks savable.

[brocky41]

This is great - a nascar champ - and he sounds like hes just come outta Talladega Nights.

http://www.youtube.com/watch?v=jkEtphvIwNU" onclick="window.open(this.href);return false;

[DAT620]

This is great - a nascar champ - and he sounds like hes just come outta Talladega Nights.

http://www.youtube.com/watch?v=jkEtphvIwNU" onclick="window.open(this.href);return false;

lol hes american so hes either A) never seen a track with corners or B) never seen a track that isnt oval

"Bat ers"

[broke]

Remember the 2Fast 2Furious R34? There are 27 cars in this series, I just CBF posting them all. Courtesy of my new favourite website, http://www.barryboys.co.uk" onclick="window.open(this.href);return false;. Enjoy!

[broke]

No chassis rails? No welder? No Problem!

Owner commentary:

The previous section of frame was so rusted through it was dangerous to drive on. It contained huge holes and both the shock mounts and rear leaf spring hangers had either rusted free or would do so on the next large bump. I was advised to find another toyota frame and weld on a new rear section, but between not feeling confident in my welding and not wanting an additional ty truck in my driveway, I took a less conventional approach. Up at my local public works shop I found an abundance of scrap sign post (galvanized!) from when they cut posts to length (instead of purchasing 8 foot posts they purchase 10 foot posts and lob off 2 feet -thats government work for you). They came in two different widths, and one width was the EXACT interior dimension of the truck frame. From there I hammered post down the tube, shimmed it in place with wedges I made from taking a wall off of a sign post, and bolted it onto the frame. From this I was able to stagger sign post into the same curvature of the previous frame. I bolted the sign posts metal to metal on the insides of the tubes on interval, and when finished, through bolted top to bottom on interval. No nut went on w/out a lock washer. I also plated the inside w/ scrap aluminum to keep the pieces from shifting. For the cross bracing I used pressure treated wood. I felt this was alright since it would primarily be subjected to horizontal stress and not have to support any weight, it also allowed for ease of lag screwing on a gas tank hanger. The front leaf spring hanger bolted easily onto the sign post. My old rear leaf spring hangers were rusted useless so I made new ones out of a shot of sign post, a bolt, and some self lubricating board. The brake lines I never actually disconnected throughout the whole project and worked around them, and screwed the box back to the frame when I was finished. I had to do some work with the fuel sending unit, but I won't go into detail on that w/out supporting pictures. Once I took it off blocks I was working on, I could not believe how strong it felt. Ten times better than the old frame, and just as good as any ordinary frame

[brocky41]

Isnt she a beut

[broke]

I'm going to sign up to barryboys.co.uk just so I can post this thing.

[Josh]

What a back-water abortion

[2 doors]

Had a wtf moment the other day, I have just finished going through all my tool boxes and tools and having a tidy up, through my panelbeating/welding tool-box I have found three right hand gloves, NO LEFT HAND, I BOUGHT A NEW PAIR NOT THAT LONG AGO, WHERE DO ALL THE LEFT HAND GLOVES GO IN THIS WORLD????? even found a brand new still in the wrapper motorcross glove lying on the side of the road xmas eve, yip it was a right hand glove too.

[DAT620]

find the f*ck wit with two left hands and give him a talking too, chances are he also has two left feet.