hey just woundering if anyone on here would have a sr20det power steering pump bracket? apparently the sr20det bracket is different to a sr20de? i know you guys wouldnt need it in for your conversions so thought there might be couple lying around.
Thanks Dale
sr20det
Re: sr20det
Never heard that before. Dont see it would be
"It's ok, we know what to do...we talked about this a lot on the internet."
Re: sr20det
If you find they are the same as the de ones let me know as I have one of them lying around.
-
spiderwebfx
- Datsun Dreamer
- Posts: 166
- Joined: Thu May 05, 2011 10:38 pm
- aka: Chris
- Location: Rotorua
- Contact:
Re: sr20det
RWD or FWD?
RWD are the same, I know as I have both sitting in my garage.
RWD are the same, I know as I have both sitting in my garage.
Re: sr20det
The spare I have is RWD so let me know if you need it finchy.spiderwebfx wrote:RWD or FWD?
RWD are the same, I know as I have both sitting in my garage.
Re: sr20det
ok il have to double check then, mine is rwd black top nd the pully of the power steering pump sits alot more forward than the pully on crank?
Thanks
Thanks
Re: sr20det
think you are refering RB vs SR which is the case.
But can be modded to fit with a few washers.
But can be modded to fit with a few washers.
"It's ok, we know what to do...we talked about this a lot on the internet."
-
spiderwebfx
- Datsun Dreamer
- Posts: 166
- Joined: Thu May 05, 2011 10:38 pm
- aka: Chris
- Location: Rotorua
- Contact:
Re: sr20det
The pulley on the crank should have three sets of ribs for the alternator belt, air conditioning belt and power steering belt. The forward most one is the one used for the power steering.
-
Bartman
- Committee Members
- Posts: 7303
- Joined: Sat Jul 19, 2008 9:04 am
- Location: Datsun City
- Location: Christchurch New Zealand!!!!
- Contact:
Re: sr20det
Did anything SR powered come fitted with hicas?
I found that the hicas equiped powersteer pulleys were different.
I found that the hicas equiped powersteer pulleys were different.
They don't call me the man with the rubber arm for nothing you know.............
-
spiderwebfx
- Datsun Dreamer
- Posts: 166
- Joined: Thu May 05, 2011 10:38 pm
- aka: Chris
- Location: Rotorua
- Contact:
Re: sr20det
Yes. Some S14's had hicas. I can't tell you anything about the differences on it though. I think the pump is completely different to a non-hicas one so this could be why it doesn't match up.
If it is because the pump is from a HICAS equipped vehicle, you'll find it's probably not the bracket that is the problem, but the pump.
Quick photo comparison: Different angles but I'm not going to troll google images for better ones.
HICAS
Non-Hicas
If it is because the pump is from a HICAS equipped vehicle, you'll find it's probably not the bracket that is the problem, but the pump.
Quick photo comparison: Different angles but I'm not going to troll google images for better ones.
HICAS
Non-Hicas