z31 cv shafts complete(turbo 4 bolt,29 spline)

[mikemac44]

Hi trying to find 2 complete cv shafts from z31 turbo.4 bolt outer cv at companion flange,and 29 spline at diff sidegear ends,also 280zx diff pinion flange,cheers

[85_Z31]

I have 2 companion flanges idon't need

but the rest of the bits are long gone

[sr1600]

I suspect i may have some of the bits you need left over from this lot, but untill I confirm all the pieces i need im not sure.
Will count the splines on the shafts on the left tonight.

[DJZ]

The leftmost ones look like late model shafts, R32 S13 etc

I've got a 280ZX diff input flange and might have some 4x1 shafts for sale when I change mine for 3x2 shafts. What car are you wanting them for?

[mikemac44]

Cheers for that,the axles on the left are to late model.I have a 1977 gs31 fairlady 2+2(s30 shape,like a 240z/260z/,and have been given a r200 long nose diff to swap over,but it didn't come with axles or sidegear flanges,and the donor doesn't know what it came from.Reading overseas forums its a common upgrade to fit z31 turbo 4 bolt axles and get companion flange adapters from the USA. The diff pinion flange I have is not the right drive shaft bolt pattern and size to swap in to the r200,apparently some 280z and 280zx do and are the same bolt pattern,and its just a matter of a direct swap,cheers Mike

[sr1600]

Ever find some?

Wouldnt mind keeping the outer flanges if you dont need them

[mikemac44]

Hi thanks for reply,How much did you want for whats in the picture.And did you have any 280zx stub axles,i think 240z ones are 27 spline and im trying to find some 29 spline ones,which should be on some 280z and 280zx ones,cheers

[sr1600]

Hi thanks for reply,How much did you want for whats in the picture.And did you have any 280zx stub axles,i think 240z ones are 27 spline and im trying to find some 29 spline ones,which should be on some 280z and 280zx ones,cheers

Hmmm 29 spline ones counted them they are 27 will count them in the light tommorow ,The four bolt outer flange sets appear to be 27 spline as well.

These are the left overs from converting my 1600, Wouldn't mind keeping the outer cv's off these shafts as spares for mine rest is free game, if there any good to you make an offer

[mikemac44]

Hi,are the ends going in to the diff 29 spline?