Luke's 1200 Coupe

Show everyone your mean datto projects/rides
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by gingofthesouth »

broke wrote:
luke wrote:i think the stereotype described by broke is unfortunately far too common these days
These days? I learnt this trick from a DA5 Integra owner circa 1998! I thought with the affordability of actual VTEC engines it had all but died out! I certainly wasn't dissing Hondas, just relating some of my awesome 90's boy-racing techniques.

Next week: Putting your auto car in neutral at the lights and rolling back for a moment before putting it in drive so that people think you have a manual.
Or, holding it in low until the revs are up, take your foot off the throttle as you shift it to D2, then put your foot on, repeat into drive and you have a manual haha

The 90's was truly special. Especially all the Integras who always thought their car was faster than my GTiR until a session out Waimea West brought them back to reality :P

That is where my hate of Hondas came from. That and the fact they all wore flat peaks and worked at McDonalds. Always wanted an NSX back then though...
My orangatang 510 here.
luke
Datsun Addict
Posts: 1028
Joined: Thu Sep 15, 2011 6:49 pm
Location: Christchurch
Contact:

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by luke »

theres been a lot of drunken nights in front of this computer screen meticulously studying every mod and how it would improve things hahaha.

finally learning how to talk datsun/ga16de.

@broke...... week after that.... backing off the throttle at certain points when accellerating slightly before powering on so people think you are driving a manual.....
1972 1200 coupe KB110
broke
Datsun Addict
Posts: 998
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by broke »

Haha, yeah I was also thinking of a "tech section" where I teach you how to correctly apply black stockings to tail lights for the tinted lights look too. :lol:

Did you know the same stocking can be used as an air filter instead of one of those expensive K&N ones for the max intake "ddooooOOORRRT"? :burnout:

I miss my youth :deadhorse:

Oh yeah, that guy's site looks pretty helpful.... but fully ditch the catalytic converter! Keep the sensor thing though, just put a fitting for it on the exhaust. Scrapping it might even pay for some more mods.
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by gingofthesouth »

broke wrote:Haha, yeah I was also thinking of a "tech section" where I teach you how to correctly apply black stockings to tail lights for the tinted lights look too. :lol:

Did you know the same stocking can be used as an air filter instead of one of those expensive K&N ones for the max intake "ddooooOOORRRT"? :burnout:

I miss my youth :deadhorse:
Or the "Paint the inside of the light covers so your lights match the rest of the car during the day!

Eg, My GTX here:
Red Mazda.JPG
Those days have passed :P
You do not have the required permissions to view the files attached to this post.
My orangatang 510 here.
User avatar
brocky41
Financial Member
Posts: 1764
Joined: Sat Jul 19, 2008 11:05 am
aka: Brocky
Location: Christchurch
Contact:

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by brocky41 »

gingofthesouth wrote:
broke wrote:Haha, yeah I was also thinking of a "tech section" where I teach you how to correctly apply black stockings to tail lights for the tinted lights look too. :lol:

Did you know the same stocking can be used as an air filter instead of one of those expensive K&N ones for the max intake "ddooooOOORRRT"? :burnout:

I miss my youth :deadhorse:
Or the "Paint the inside of the light covers so your lights match the rest of the car during the day!

Eg, My GTX here:
Red Mazda.JPG
Those days have passed :P
Sorry to fill thread with shiz

BUT i did see this on a van as recently as last week - and the guy was not young.
User avatar
Kitch
Financial Member
Posts: 1689
Joined: Wed Aug 20, 2008 9:29 am
Location: Timaru
Location: Timaru
Contact:

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by Kitch »

broke wrote:Haha, yeah I was also thinking of a "tech section" where I teach you how to correctly apply black stockings to tail lights for the tinted lights look too. :lol:

HAHA thats gold John..... you showing your age now!
I did that to my tail lights on my DX in 1994!!!! (even asked my mum for some old panty hose to do it! :roll: )

That was just after I had graduated from painting my grills & steel wheels black, angle grinding through coil springs in-situ, home stereo speakers in the back parcel tray connected to jap import tape deck with no band x-pander, poorly affixed apply yourself window tint, and drilling holes in my mufflers for more horse power & raspy exhaust note! :mrgreen:
broke
Datsun Addict
Posts: 998
Joined: Mon Apr 04, 2011 11:25 pm
aka: John
Location: Christchurch

Re: Luke's GA16D-Nothing (yet) 1200 Coupe - ENGINE ARRIVED!

Post by broke »

You can tell that GTX pic is old... because it still has the plastic A-pillar covers, unlike every one I see now.

Sorry for going off topic, maybe we need a "reminiscing about the glory days" thread for us old-timers...

Haha, Kitch I also did the home stereo speakers in the back thing.... in my 1981 Mitsi Mirage. Which also had a full 6 piece bodykit (true story!). I'm actually still rocking the "no band expander" in my C32 as well.
luke
Datsun Addict
Posts: 1028
Joined: Thu Sep 15, 2011 6:49 pm
Location: Christchurch
Contact:

Re: Luke's GA16DE Coupe - now has a ute diff, and ute...

Post by luke »

the hunt for a ute diff is over.

I just bought one off trademe......... complete with the ute attached. :deadhorse: :deadhorse: :deadhorse:

positives.....

in chch so no shipping costs
gives me the diff i need.
possible spares for my ute.
live plates

negatives.....

the rest of the ute comes with it.
1972 1200 coupe KB110
dirtyleppa
Datsun God
Posts: 3943
Joined: Sat Jul 19, 2008 1:35 pm
aka: leppa
Location: BLENHEIM
Contact:

Re: Luke's GA16DE Coupe - now has a ute diff, and ute...

Post by dirtyleppa »

could be keen on some parts if available fruit luke
luke
Datsun Addict
Posts: 1028
Joined: Thu Sep 15, 2011 6:49 pm
Location: Christchurch
Contact:

Re: Luke's GA16DE Coupe - now has a ute diff, and ute...

Post by luke »

dirtyleppa wrote:could be keen on some parts if available fruit luke
such as?
1972 1200 coupe KB110
Post Reply