New Zealand Datsun Club

id planned on having it done by akaroa but a few further upgrades and alterations pushed the on the road date back a month or 2 so hopefully by christmas time if all goes to plan

sweet!
also good to hear your having an uncut grill

Had a but more progress on the weekend and yesterday, finally got around to getting the arp flywheel bolts carefully machined down by 5mm so the pull up tight without bottoming out in the crank seeing the aftermarket flywheel is thinner than factory. I torqued & Loctited it all up so it hopefully won't come loose. Threw the box in and fill her up with redline. Then made up the rest of the 3" exhaust and welded it up to the dump pipe. Not much to do now, need a decent brand oilpress gauge and possibly oil andcwater temp gauges also but mostly need just a oil press. Oh and a sandwich block for fitting the sensors into.

Oh yeah and got the rims in a bit by having my mate from Hamilton-jet machine the backs of the rims to remove some offset, was a freebie too which is mint.

Been a bit slack of late, get my license back finally on the 26th of Jan so starting to get onto it again, the only things now left to do/get are: Samco rad hoses, t-bolt clamps, wideband kit, raise the front 15-20mm for sump safety , then just fill with oil and start up. Here's the filters I got for it

Sweet dude, You be on the roads for summer

Txt me when you fire it up. I wanna be present for such an auspictious occation.

Very nice, keep up the good work!

You just want another ride down a narrow street with cars on each side Simpson!

hell no!
I don't care if I never ride with this cunt again. He has a deathwish! Although I might if I'm oiled up with blue diesels. (Which I very seldom drink nowdays)