Page 1 of 1
Front suspension parts
Posted: Sun Oct 12, 2014 11:41 am
by Tony_Whenua
After 1200 parts:
- left tension rod
- The rods that join the sway bar to the LCA (b310 ones are too big)
Re: Front suspension parts
Posted: Sun Oct 12, 2014 10:50 pm
by Naki-Fisher
Quick question are the all the same size and Length?
Re: Front suspension parts
Posted: Tue Oct 14, 2014 7:02 pm
by Tony_Whenua
Naki-Fisher wrote:Quick question are the all the same size and Length?
Shit I dunno.
I'm assuming the sway bar link rods are different between B110 and b310 as the ones I got from Brocky were way bigger than the original B120 ones I had.
About the Tension rod ... I'm unsure.
Hoping people on here would know.
Re: Front suspension parts
Posted: Wed Oct 15, 2014 8:25 am
by Naki-Fisher
cool my question was more for the tension rods
Re: Front suspension parts
Posted: Wed Oct 15, 2014 7:18 pm
by Bartman
What size are the bolts that hold the castor rod to the lower arm?
Re: Front suspension parts
Posted: Wed Oct 15, 2014 9:38 pm
by Tony_Whenua
the head of the bolt is a 17mm - is that what you wanted?
Re: Front suspension parts
Posted: Wed Oct 15, 2014 9:57 pm
by Bartman
Yes.
That means that 110/210 stuff wont work.
So you need B310, or GB110 castor rods. As the early stuff was smaller.
Re: Front suspension parts
Posted: Fri Oct 17, 2014 12:03 am
by Naki-Fisher
Now I'm lost
17mm meaning the nut on the end of the rod or 17mm the bolts to hold it to the arm that comes off the crossmember?
Re: Front suspension parts
Posted: Fri Oct 17, 2014 11:59 am
by Bartman
17mm head on the bolts which hold the castor rod to the lower arm.
Re: Front suspension parts
Posted: Wed Oct 29, 2014 9:24 pm
by Tony_Whenua
bump .... Any one?