Sunny B310 Project

Show everyone your mean datto projects/rides
LilMan
Newbie
Posts: 18
Joined: Wed May 25, 2011 3:58 pm
Location: Motueka
Contact:

Re: Sunny B310 Project

Post by LilMan »

13"s and standard tires i guess.
82' Datsun Sunny B310 Sedan
fast4motion
Datsun Dreamer
Posts: 152
Joined: Mon Nov 16, 2009 10:01 pm
aka: Brent
Location: Napier

Re: Sunny B310 Project

Post by fast4motion »

For the front, you should be fine with good aftermarket springs, or possibly compressed springs. Cut springs will probably cause your struts to bottom out. Hillman Avenger springs are supposed to work well also, after slight modification.
For the rear, cutties will be okay if you don't wanna spend any money on them.
But you'll need to shorten your shocks (front and rear) to keep your springs captive.
My B310 sat just under 100mm on 15's, but I shortened my front struts and fitted completely different shocks (which I also shortened).
User avatar
Josh
Financial Member
Posts: 1197
Joined: Tue Jul 22, 2008 5:23 pm
aka: SeEn-ThE_lIgHt
Location: Datsun Capital
Location: Hornby
Contact:

Re: Sunny B310 Project

Post by Josh »

I Just run captive Cut springs in my B310, Front shocks are new Munroe(?) gas, rear new KYBs From a friends lowered DX corolla. I have an aftermarket 22mm swaybar and new Urethane bushes up front and my car rides very well, never bottoms out or bounces around
1969 Mk1 Escort Coupe~ CA18DET full-on project
1972 B110 Deluxe~ Daily
1965 P410~ Wifey daily
LilMan
Newbie
Posts: 18
Joined: Wed May 25, 2011 3:58 pm
Location: Motueka
Contact:

Re: Sunny B310 Project

Post by LilMan »

Ok cheers for that. :D
82' Datsun Sunny B310 Sedan
Post Reply