D1RTY6's C331 Gloria

Post by **brocky41** » Sat May 19, 2012 11:00 am

Pretty sure we got one here dude ill check today - is from the blue car again.

Post by **D1RTY6** » Mon May 21, 2012 3:07 pm

brocky41 wrote:Pretty sure we got one here dude ill check today - is from the blue car again.

Choice will text you tonight.

update on the car.

I got head gasket sorted Saturday torqued down and every thing back on. got excited and tried starting it and nothing. It just keeps turning over and over not even sounding like its going to kick into life

As far as i can tell everything that i pulled off has been put back on, and I've exhausted my knowledge on trying to fix it as i know little about these motors.

any ideas what it could be??

Possibly time for a engine conversion as i have a feeling these L-Series don't like me.

Cheers

Nathan

DJZ · Post by **DJZ** » Mon May 21, 2012 5:08 pm

How much of the electronics did you pull off, did you remove the dizzy etc?

Post by **D1RTY6** » Mon May 21, 2012 5:30 pm

DJZ wrote:How much of the electronics did you pull off, did you remove the dizzy etc?

Yea removed the Dizzy but put it on the same as last time when i got it running. its getting spark no problem. also getting fuel.

if I cant get it going would you mind popping round after work one day this week and ill flick you some cash or beer or something.

Post by **brocky41** » Mon May 21, 2012 5:42 pm

Check your firing order and make sure leads are round right way, also throw new plugs in l series can be bitches for eating plugs.

torqued · Post by **torqued** » Mon May 21, 2012 5:43 pm

Stick a timing light over it.

Post by **D1RTY6** » Mon May 21, 2012 6:02 pm

torqued wrote:Stick a timing light over it.

Have also done this

brocky41 wrote:Check your firing order and make sure leads are round right way, also throw new plugs in l series can be bitches for eating plugs.

Have also checked firing order. will get new plugs this week

DJZ · Post by **DJZ** » Mon May 21, 2012 6:15 pm

Timing light is flashing in pretty much the right spot when you are cranking it? Are the plugs wet when you take them out?

There's only 3 things you need for combustion and it sounds like you've got them all

so that would make me think the timing is wrong.

Post by **D1RTY6** » Thu May 31, 2012 7:05 pm

DJZ wrote:Timing light is flashing in pretty much the right spot when you are cranking it? Are the plugs wet when you take them out?

There's only 3 things you need for combustion and it sounds like you've got them all so that would make me think the timing is wrong.

This thing is still beating me .......

I've chucked a timing light over it, its hitting pretty much the right spot. plugs are a little wet when i take them out, forgive me for my ignorance but that would indicate what?

anymore info would be much appriciated

Cheers

Nathan

Post by **D1RTY6** » Thu May 31, 2012 7:23 pm

Quick question

If the inlet cam lope is gong down in compression stroke and the exhaust up on cylinder one, the crack pully should be reading TDC yea?

if so i think i found my problem but cant figure out how it happend

New Zealand Datsun Club

D1RTY6's C331 Gloria

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E

Re: D1RTY6 's 1978 C331 Gloria SGL-E