I couldnt recomend enough NOT to go to Diggers Brakes and cables. Both times ive been there for cables. they have taken a fortnight to do and cost double what they estimated. And they were simple shortening of scooter throttle cables.
I went to Safe R Brakes on fitz . dropped of Andy gals cable and said replicated this. Bang that day $30. so stoked.
Garth's SR20 B110
-
- Datsun God
- Posts: 2289
- Joined: Sat Jul 19, 2008 10:19 am
- Location: nothere
Re: Garth's SR20 B110
Sweet cheers for that chris. Much appreciated.
Here are some pics of me playing around with some spray cans...its not going to be black when it gets property painted but i just thought i would make it look better until I have money for proper panel and paint. Dont be miss lead if the paint job looks ok in the photos..I can assure you that this was painted by Garth Customs and is of terrible quality haha
Here are some pics of me playing around with some spray cans...its not going to be black when it gets property painted but i just thought i would make it look better until I have money for proper panel and paint. Dont be miss lead if the paint job looks ok in the photos..I can assure you that this was painted by Garth Customs and is of terrible quality haha
You do not have the required permissions to view the files attached to this post.
Re: Garth's SR20 B110
With Akaroa only 37 days (888 hours or 53280 minutes) away still left to go I have:
Exhuast
Get drive shaft lengthened and installed
Front brakes in and brake lines run
Clutch line run
raidiator installed
throttle cable
Also driveshaft loop (thanks for reminding me)
going to be close getting it going
Exhuast
Get drive shaft lengthened and installed
Front brakes in and brake lines run
Clutch line run
raidiator installed
throttle cable
Also driveshaft loop (thanks for reminding me)
going to be close getting it going
Last edited by Garth on Fri Sep 14, 2012 6:42 pm, edited 1 time in total.
-
- Datsun God
- Posts: 2289
- Joined: Sat Jul 19, 2008 10:19 am
- Location: nothere
Re: Garth's SR20 B110
Dont forget driveshaft loop dude. Not only are they are cert requirment but a damn good saftey item
-
- Committee Members
- Posts: 7303
- Joined: Sat Jul 19, 2008 9:04 am
- Location: Datsun City
- Location: Christchurch New Zealand!!!!
- Contact:
Re: Garth's SR20 B110
They sure are!
I was at the drags once, and a CA18DET+nitrous KP61 starlet blew a tailshaft uni. I don't recall if it had a loop or not, but it made a hell of a mess of the tunnel/tailhousing of the gearbox.
I'm actually glad it's a cert requirement.
I was at the drags once, and a CA18DET+nitrous KP61 starlet blew a tailshaft uni. I don't recall if it had a loop or not, but it made a hell of a mess of the tunnel/tailhousing of the gearbox.
I'm actually glad it's a cert requirement.
They don't call me the man with the rubber arm for nothing you know.............
- Josh
- Financial Member
- Posts: 1197
- Joined: Tue Jul 22, 2008 5:23 pm
- aka: SeEn-ThE_lIgHt
- Location: Datsun Capital
- Location: Hornby
- Contact:
Re: Garth's SR20 B110
Looking goood!
Im sure hoping you make it to Akaroa in it
Im sure hoping you make it to Akaroa in it
1969 Mk1 Escort Coupe~ CA18DET full-on project
1972 B110 Deluxe~ Daily
1965 P410~ Wifey daily
1972 B110 Deluxe~ Daily
1965 P410~ Wifey daily
Re: Garth's SR20 B110
List slowly getting smaller:
have got driveshaft in getting sorted at the moment
throttle cable in getting sorted at safe r brakes at the moment
plan is to take the car around to Nicks next saturday and we plan on getting the radiator in and mounted that day.
so only things left then will be:
exhaust
brakes
driveshaft loop
clutch
pushing very hard to get it ready..really hope i make it. no hassling my average paint job if i do make it...(my excuse is im trying to set myself up for most improved next year or something )
have got driveshaft in getting sorted at the moment
throttle cable in getting sorted at safe r brakes at the moment
plan is to take the car around to Nicks next saturday and we plan on getting the radiator in and mounted that day.
so only things left then will be:
exhaust
brakes
driveshaft loop
clutch
pushing very hard to get it ready..really hope i make it. no hassling my average paint job if i do make it...(my excuse is im trying to set myself up for most improved next year or something )
Re: Garth's SR20 B110
no way you can be dissed on the paint job with that motor combo in it, and yeah will put you in the running for most improved like you say.
Re: Garth's SR20 B110
May have made some nice progress yesterday so picks to come on that..thanks Nick
Still to go:
Exhaust
Brakes/Clutch line
driveshaft loop
money is the only thing from stopping this being ready for akaroa....still trying very hard though.
After a cheap but reasonably decent exhaust, Nick mentioned some place in hornby that do a good price exhaust that a few people on here have used? Anyone got more details?
Still to go:
Exhaust
Brakes/Clutch line
driveshaft loop
money is the only thing from stopping this being ready for akaroa....still trying very hard though.
After a cheap but reasonably decent exhaust, Nick mentioned some place in hornby that do a good price exhaust that a few people on here have used? Anyone got more details?
-
- Datsun Driver
- Posts: 221
- Joined: Tue Sep 15, 2009 11:14 am
- aka: Jordan
- Location: Christchurch
- Contact:
Re: Garth's SR20 B110
hornby exhaust specialist on waterloo rd. its where i got mine done