a12 sluggish below ~2000rpm

[beaver]

i threw a carb kit at it so yes, new jets. 99% sure they are all in the right place.

hand over carb trick? do explain

trans doesnt sound/feel like its slipping. revs dont build with no extra speed or anything

[classicdat]

Remove air cleaner, hold about 2500 rpm on it, block air intake with hand remove before engine dies, repeat. Sucks muck through jets. Jets can be accessed with carb in place, just in case you are unsure. Check they are tight. Sounds strange idle is ok, but not low speed.

[2 doors]

forgot this was an auto, but that shouldnt make much differance, keep us posted