510 / 1600 STRUT CHANGE

[hsepwr]

Its been a while since i done my strut conversion on my 1600 and ive almost forgotten all the ins and outs of changing struts into a 1600.

I currently have 910 struts with z32 discs and 4 pot brakes but im wanting a strut to convert to coil over that will do the same job that i can either put the 910 hub setup on or that has a hub and i can bolt the z32 disc to.

im unsure if the likes of a r30 s12 280zx has the same stub as my 910 so any help would be great. I have some R30 struts and im unsure if the 910 hub will fit unless i start pulling it apart.

Cheers

[mahony]

I have used 280z struts on my 510 and they have a bigger stub than the factory 510 one.. Dunno about the other struts you mentioned

[gingofthesouth]

Craig, see Daniels coil over setup where he had struts made to slide over and weld to the cut struts you already have in the car.

Struts fresh here:
http://www.nzdatsun.com/forums/viewtopi ... &start=210" onclick="window.open(this.href);return false;

Fitted here:
http://www.nzdatsun.com/forums/viewtopi ... &start=230" onclick="window.open(this.href);return false;

[mint16]

R31 struts can fit the 910 hubs using r31 inner bearing and 910 outer bearing.

[torqued]

I think we need to see a few photos of this Mahony Datsun 510

[chris_g1]

I have a set of 280zx struts and hubs any strut with a 19mm outer bearing will fit 910 hubs .
The 280zx hubs would let you run more dish on your wheels . im not using the 280zx struts or hubs so if your keen ??

[hsepwr]

I have a set of 280zx struts and hubs any strut with a 19mm outer bearing will fit 910 hubs .
The 280zx hubs would let you run more dish on your wheels . im not using the 280zx struts or hubs so if your keen ??

Id be keen on having a look at them