510 / 1600 STRUT CHANGE

all your DIY needs
Post Reply
User avatar
hsepwr
Datsun Nutter
Posts: 428
Joined: Mon Sep 22, 2008 9:18 pm
aka: Craig
Location: Hastings
Contact:

510 / 1600 STRUT CHANGE

Post by hsepwr »

Its been a while since i done my strut conversion on my 1600 and ive almost forgotten all the ins and outs of changing struts into a 1600.

I currently have 910 struts with z32 discs and 4 pot brakes but im wanting a strut to convert to coil over that will do the same job that i can either put the 910 hub setup on or that has a hub and i can bolt the z32 disc to.

im unsure if the likes of a r30 s12 280zx has the same stub as my 910 so any help would be great. I have some R30 struts and im unsure if the 910 hub will fit unless i start pulling it apart.

Cheers
I REAKON THE WORD CANT MEANS CANT BE FU%&#CKED
mahony
Newbie
Posts: 4
Joined: Sat Aug 15, 2009 11:14 pm
aka: mahony
Location: christchurch
Contact:

Re: 510 / 1600 STRUT CHANGE

Post by mahony »

I have used 280z struts on my 510 and they have a bigger stub than the factory 510 one.. Dunno about the other struts you mentioned
'71 p510 sedan s14 sr20det
User avatar
gingofthesouth
Site Admin
Posts: 1932
Joined: Tue Mar 23, 2010 4:06 pm
aka: Ging
Location: Lower Hutt
Contact:

Re: 510 / 1600 STRUT CHANGE

Post by gingofthesouth »

Craig, see Daniels coil over setup where he had struts made to slide over and weld to the cut struts you already have in the car.

Struts fresh here:
http://www.nzdatsun.com/forums/viewtopi ... &start=210" onclick="window.open(this.href);return false;

Fitted here:
http://www.nzdatsun.com/forums/viewtopi ... &start=230" onclick="window.open(this.href);return false;
My orangatang 510 here.
User avatar
mint16
Financial Member
Posts: 1854
Joined: Sat Jul 19, 2008 8:36 am
aka: Brendan
Location: Christchurch

Re: 510 / 1600 STRUT CHANGE

Post by mint16 »

R31 struts can fit the 910 hubs using r31 inner bearing and 910 outer bearing.
72 Datsun 1200 Wagon
86 Toyota AE85 Trueno 4AGE ITB
User avatar
torqued
Datsun God
Posts: 2125
Joined: Sat Jul 19, 2008 11:49 am
aka: Adam
Location: Christchurch

Re: 510 / 1600 STRUT CHANGE

Post by torqued »

I think we need to see a few photos of this Mahony Datsun 510
"It's ok, we know what to do...we talked about this a lot on the internet."
chris_g1
Committee Members
Posts: 679
Joined: Sun Mar 20, 2011 11:54 am
Location: Ashhurst
Contact:

Re: 510 / 1600 STRUT CHANGE

Post by chris_g1 »

I have a set of 280zx struts and hubs any strut with a 19mm outer bearing will fit 910 hubs .
The 280zx hubs would let you run more dish on your wheels . im not using the 280zx struts or hubs so if your keen ??
User avatar
hsepwr
Datsun Nutter
Posts: 428
Joined: Mon Sep 22, 2008 9:18 pm
aka: Craig
Location: Hastings
Contact:

Re: 510 / 1600 STRUT CHANGE

Post by hsepwr »

chris_g1 wrote:I have a set of 280zx struts and hubs any strut with a 19mm outer bearing will fit 910 hubs .
The 280zx hubs would let you run more dish on your wheels . im not using the 280zx struts or hubs so if your keen ??
Id be keen on having a look at them
I REAKON THE WORD CANT MEANS CANT BE FU%&#CKED
Post Reply