L28 build idea

[crownin round]

Ok so my l24 is a little tired. And im considering rebuilding gonna be around 700 for the stuff. any one no any cheaper options?

So this made me consider an l28 build. Budget is minimal. i was wondering what putting that under my e30 head would be like? also what the cheapest stroker build. I wanted to try a n42 block overbored 40 thou or 1mm with ld28 crank and 1 mm oversized stock pistons with maybe l24 rods. To keep price down. Thatd give me around 2.9 3.0 litres displacement?

Also any l28 engines or main parts. I have searched but couldn't find anything on just running an ld crank and stand overbore l28 pistons.

cheers

[crownin round]

The plan was block bored 1mm over any block should do right?
Use ld28 crank
Use l20a rods
Use current e30 head for mean time with 2mm head gasket unless i can find a n42 head which would be ideal and run with stock gasket
Flat top 87mm l28 pistons

should be 2.96L and 10.1 with n42 and 10.7 with e30

Any cam advice?

Want to try stick with l28 pistons as a full rebuild kit with gasket set, pistons, rings, main bearings, rod bearings, thrust washers, freeze plugs, timing kit and oil pump. is around 600 or without timing and oil 460.

[240znz]

You couldn't do a stroker for anything close to $700 if that is really your budget. Do you have a LD28 crank already? Do you own a machine shop?

Give the poor old L24 a birthday, it's been 40 years.

That's my 2 cents. Might sound a little negative but price this up before you go any further to avoid what could be financial disappointment. Cheap strokers don't last. Have you thought about induction mods for the additional 600cc or brake mods ect?

I sound like a tax accountant! Sheesh!

[brocky41]

You couldn't do a stroker for anything close to $700 if that is really your budget. Do you have a LD28 crank already? Do you own a machine shop?

Give the poor old L24 a birthday, it's been 40 years.

That's my 2 cents. Might sound a little negative but price this up before you go any further to avoid what could be financial disappointment. Cheap strokers don't last. Have you thought about induction mods for the additional 600cc or brake mods ect?

I sound like a tax accountant! Sheesh!

You're right though - just google l31 build and see the yanks even complain about the cost, for not much more than L28 - unless your spending like 10K on a race engine with full on carbs etc,

The last LD28 V07 crank i sold wend for $300 and they go for twice that in the states.

Another 2c worth - so thats 4c so far lol

L24 on carbs with upped compression and a cam will still give you that throaty roar.

[crownin round]

cheers i assumed as such why i asked for any options to rebuild l24 for less than 700 first.

[Ivan]

If I was you I would go for an L28 maybe run carbs,headers etc. A L28 has loads more torque than a L24 and that alone may keep you happy.At the end of the day it come down to one thing..Money

[Ivan]

If you keep an eye on my build You'll see how i'll do mine.

[disruptiv]

I have a l28 in parts if you would like to buy that, it's 98% all there.

[maddat1]

I have a L28 eng which i pulled out of my 260z road/track car.
Pm me if you keen.