B310 sr20 conversion
-
- Newbie
- Posts: 1
- Joined: Sun Dec 06, 2015 9:26 am
- Location: Auckland
- Contact:
B310 sr20 conversion
Hey am dropping a sr20 de into my b310 sunny am wanting to convert the engine from dizzy cap to coil packs. anybody on here that has done this before any advice would be greatly appreciated....cheers
- tlssunny
- Financial Member
- Posts: 724
- Joined: Sun Jul 28, 2013 5:39 pm
- aka: jesse
- Location: rakaia
- Contact:
Re: B310 sr20 conversion
pmd...........
RDAP- Rakaia Datsun b310 Auto Parts
TLS- The Late Shift Restoration Services
TLS- The Late Shift Restoration Services
Re: B310 sr20 conversion
Since the CAS and the Dizzy mount different,
You'll be wanting to mount the CAS disk and pickup into the Dizzy case,
I did this on a VG there should be pics on my thread if interested on how i went about it.
It's pretty straight forward, but i did have to make some spacer washers.
You'll be wanting to mount the CAS disk and pickup into the Dizzy case,
I did this on a VG there should be pics on my thread if interested on how i went about it.
It's pretty straight forward, but i did have to make some spacer washers.
"It's ok, we know what to do...we talked about this a lot on the internet."
Re: B310 sr20 conversion
Is it a rwd sr20de? If so you can convert it to running DET cas and ecu with a daughter board to tune it. S13 sr20det ecus are a little hard to find, but are the easiest one to use and retune.